OUR SERVICES
Our Efficient Engineering Energy allows us to professionally deliver
Engineering Procurement and Construction Management (EPC,M)
services to a variety of our valued clients. For over 10 years, our team
members have gained valuable experience in delivering:
Engineering Procurement and Construction Management (EPC,M)
services to a variety of our valued clients. For over 10 years, our team
members have gained valuable experience in delivering:
• Conceptual Designs
• Feasibility Studies
• Basic Engineering Packages (BEP)
• Front-End-Engineering Designs (FEED)
• Detail Design and Engineering
• Procurement and Logistics Support
• Site Installation and Supervision
• Site Audits and As-Building
• Commissioning and Pre-startup
• Projects Control and
• Project Management Services
Depending on our clients needs, we can offer the following types
of projects:
• Engineering, Procurement and Construction (EPC)
• Turnkey and Packaged Systems
• Engineering, Procurement and Construction Management (EPCM)
ELECTRICAL ENGINEERING
Electrical Design
• Load Studies
• Planning and Optimization of reticulation and Switching
Schemes
MV & LV Systems
• Substation Control and Protection•
• Small Power and Lighting.
• Emergency Power, UPS and Battery Systems.
• Switchgears and MCCs
• Overhead Lines.
• Transformer, Generator and Motor Sizing and Selection
• Electrical Cable Sizing, Selection and Routing
• Earthing and Lightning Protection
• Cathodic Protection
• HVAC Design and Specification
• Hazardous Area Classification.
• Load Studies
• Planning and Optimization of reticulation and Switching
Schemes
MV & LV Systems
• Substation Control and Protection•
• Small Power and Lighting.
• Emergency Power, UPS and Battery Systems.
• Switchgears and MCCs
• Overhead Lines.
• Transformer, Generator and Motor Sizing and Selection
• Electrical Cable Sizing, Selection and Routing
• Earthing and Lightning Protection
• Cathodic Protection
• HVAC Design and Specification
• Hazardous Area Classification.
CONTROL & INSTRUMENTATION ENGINEERING
Our Process Measurement / Instrumentation Design and Engineering is of world class standard complying with industry standards, specifications as well as local and international safety regulations. Depending on project type, industry and client requirements, we are able to provide the following C&I design and engineering deliverables and services:
Instrumentation
• Basic Instrumentation Deliverables (i.e. Instrument Index, Datasheets, Cable Schedules, Cable Block Diagrams, Air Distribution Lists,)
• Primary and Automation Technology Selection
• Various Design and Engineering Drawings in CAD, INtools, Fdes etc. (i.e. Loop Drawings, Hook-up Drawings, Panel Wiring Drawings, Termination Schedules).
• Instrumentation Datasheets and Specifications.
• Primary Elements (Pressure, Flow, Level, Temperature etc.) Selection and Sizing.
• Instrument Switches and Transmitters Selection and Specification.
• Analytical Instruments Selection and Specification.
• Actuated On/Off and Control Valves Sizing and Selection.
• Control Panel and Junction Box Sizing, Design, Selection and Siting.
• Cable Sizing, Selection and Routing.
• Cable Tray Sizing, Selection and Routing.
• IS Calculations.
• Classified Area Equipment Selection.
• SIS and SIFs Calculations.
• Instrument IP Rating Selection.
• Instrument Air Requirements Calculations.
Control & Automation
• Basic Control and Automation Deliverables (i.e. Control Philosophies, Cause and Effect Matrices, Motor Control Matrices, Function and Logic Diagrams, RAT Lists,)
• Control Systems Sizing, Selection and Specification (i.e. DCS, ESD, PLC, HMI).
• Software Engineering.
Other C&I Deliverables and Services
• C&I Power Requirements and UPS Sizing and Selection.
• Wireless Communication Systems.
• Control Room Sizing and Design
• HVAC Sizing and Selection.
• HAZOP Studies.
• FATs and SATs.
• Commissioning.
• C&I QA/QC.
• Site As-Building.
ICT INFRASTRUCTURE AND TELECOMMUNICATION SERVICES
Through our strategic partnerships with some of the worlds best ICT companies, we at 3E Group are able to provide our clients with a number of ICT solutions that allow communities and businesses to exchange data, information and knowledge safely and securely.
Security Systems: As our client, 3E Group can help you secure your, employees, assets and property by providing with some of the cutting-edge technology solutions based on our strategic partners range of hardware and software. Our security offerings include:
• CCTV
• Time Attendance
• Access Control
• Card, Biometric & Iris Registration / Verification
• Internet Security Solutions
Telecommunication Systems: To enhance productivity of your workforce, we can provide you with integrated communication tools and systems that will enable you to stay connected with your business at all times regardless of your location. These solutions include:
• IP Networking (Switches and Telephones)
• PABX including voicemail, IM and MS Lync Integration
• Telephone Billing Solutions
• Contact Center and Voice Recording
• Video Conferencing and Tele-presence
• VOIP Systems
• Broadband Access
• Hotspot Access
• Virtual Private Network
• VSATs
Power Management Systems: We are helping some of our clients to make more informed decisions that directly improve their bottom line through implementation of Power Management Systems. These systems are primarily designed around smart metering solutions and offer the following:
Benefits for Prepaid Electricity Users
• Remote Charging which enables pre-paid meters to be loaded with electricity tokens remotely.
• Low Credit Warning via either an SMS or an email.
• Power Usage Reporting as well as Customized meter parameters reporting.
• Increased degree of self-service which decreases reliance of utility providers.
• Decreased Operational Costs due to elimination of having to drive to point of purchase to by electricity and also eliminating having to drive to the meter installation to load electricity tokens.
• Convenience of being able to load electricity tokens from anywhere.
• Simplicity through automatic loading of tokens without having to type token voucher codes.
Benefits to Post-Paid Customers
• Conventional electricity meter owners have more accurate billing information available as and when required.
• Power Usage Reports that provide basis for energy efficiency measures.
Benefits to Utility Providers
• Enhanced Billing Process and Revenue Collection efforts.
• Reduced Loss of Income through ability to monitor ghost vending as well as bridging and tempering with electricity meters.
• Reduced Customer Servicing Costs due to self-service capabilities as well as not having to drive to the actual meters to record monthly usage.
• Credible Data and Information which can be utilized for network management purposes.
PROJECTS CONTROL AND MANAGEMENT
• Conceptual and Feasibility Studies
• Cost Estimation
• Procurement and Logistics Management
• Project Management
• Project Planning and Scheduling
• Cost Estimation
• Procurement and Logistics Management
• Project Management
• Project Planning and Scheduling
Contracts Management
• Contracts Administration.
• Projects Estimation and Scoping
• Tender and Contract Documentation
• Cost Control
OUR PROJECTS
Our Team members have executed a number of projects in different industries and in different countries. Some of the major projects include:
Design, Engineering, Procurement, Installation and Commissioning of Control and Instrumentation scope on an Oxygen Compressor Replacement Project
ICT, Control and Instrumentation Scope for a new mine which included a copper processing plant and other infrastructure
Feasibility study that included all required Electrical, Control and Instrumentation Scope
Design, Engineering and installation of Plant Low Voltage System including MCCs and Associated Cabling, Small power and Lighting
Control and Instrumentation Feasibility Study.
Coal Washing Plant Commissioning
Control and Instrumentation Feasibility Study
Design, Engineering, Procurement and Commissioning of Control and Instrumentation scope for an upgrade project on carbon dioxide plant.
Control and Instrumentation Basic Engineering Package.
Design, Engineering, Procurement, Installation and Commissioning of Control and Instrumentation scope on an off-shore platform project.
Scope: 132kV overhead-line, Eskom Substation work, MV and LV reticulation for the Process Plant
Scope: MV and LV reticulation, Upgrading of 11kV Substation, Installation of emergency generators, Sizing and Building of Motor Control Centers
Scope:22kV Overhead line, installing 22kV auto-reclosure, LV installations including transformers and MCCs
Scope: Medium Voltage reticulation for the coal washing plant
I have learned new software and how they can be applied in a general business sense. 3EGroup pushes us to be as inventive in solutions as possible while maintaining the required standard for the client and as such, I have learnt how to go from ideas to practical implementations. The programme emphasizes individual responsibility for meeting targets while keeping in line with the clients’ requirements and standards. My communication skills have also improved since joining the programme due to having personal responsibility to continuously communicate with the client so that we stay on track.
As someone who consistently seeks to be actively involved in the next breakthrough in engineering as a fraternity, I had no knowledge of the innovative COMOS platform until I learnt about 3Egroup and the work the company does in the mining industry utilising COMOS. The COMOS software has given me the opportunity to explore its vast potential, from integrated multi-disciplinary designs to learning about the ability to monitor active equipment on site through IoT concepts.
As a student the programme enabled me to integrate academic learning with applications in the workplace. The programme helped me to fine tune my technical and communication skills. I have also learned critical and practical work-related skills and I believe it has given me a huge advantage in the workplace. The programme has exposed me to the COMOS platform which is an integrated plant management system. It enables different stakeholders from different fields in the plant design to interact and share data effectively
“This programme has exposed my business to a new and dynamic business model. As a business owner I have been exposed to new ways of doing business more efficiently, effectively and in a timely fashion. As a result, my business now has new innovative ways of reaching out to clients and not just doing business in a traditional sense.
The world is moving towards the digital space. I was unaware of the digital space and its untapped capabilities. Being in the programme exposed my business to this knowledge and deepened my understanding of how to operate within the space. I can now apply what I have learned to better align my business with the current world needs and ensure that my business will thrive.
Not having prior knowledge of the digital space, the main challenge which I picked up on is that there is limited knowledge with regards to the technologies used and the businesses which are in that ecosystem. As a new business, breaking into that ecosystem and building a credible reputation has been challenging.”
“I joined 3E Group as a PLC engineer, being part of the programme then exposed me to a new design software which is COMOS. During my time in the programme, we experimented with a number of different fields using COMOS, this fast track my experience with the platform and allowed me to gain more experience as I would get better at using the platform day by day.
The programme assisted in upgrading my skills when it comes to design specification, I now know how to fully develop the design in a software package, this has given me a deeper understanding of how to use engineering components within design. The understanding of the package was difficult in the initial stage however with time it became easier.
The programme has given me a competitive edge in engineering, understanding the engineering principles which are used in design, this has aided me in my journey to becoming an expert in the field.”
“I started at 3E Group as an intern. I was aware of the mining industry however, I was unaware of the engineering capabilities within the industry as a graduate. I had not been exposed to the design element in engineering. Being in the programme I was given the opportunity to run my own project. This was not an easy task as I was handed with all the responsibilities of running a project and I had to learn a lot of skills in a short space of time.
That experience exposed me to new systems and software, I now understand the principles of design, specifically with the COMOS platform. This has given me a great deal of knowledge and I now feel that I am on the right career path. This is a male dominated space and being the only woman in my department, I have had to work harder than most. If it wasn’t for the programme, I wouldn’t be where I am right now.”
Scope: Medium Voltage reticulation for the coal washing plant
Control and Instrumentation Feasibility Study
Coal Washing Plant Commissioning
Scope:22kV Overhead line, installing 22kV auto-reclosure, LV installations including transformers and MCCs
Design, Engineering, Procurement and Commissioning of Control and Instrumentation scope for an upgrade project on carbon dioxide plant.
Control and Instrumentation Feasibility Study.
As a student the programme enabled me to integrate academic learning with applications in the workplace. The programme helped me to fine tune my technical and communication skills. I have also learned critical and practical work-related skills and I believe it has given me a huge advantage in the workplace. The programme has exposed me to the COMOS platform which is an integrated plant management system. It enables different stakeholders from different fields in the plant design to interact and share data effectively
“I started at 3E Group as an intern. I was aware of the mining industry however, I was unaware of the engineering capabilities within the industry as a graduate. I had not been exposed to the design element in engineering. Being in the programme I was given the opportunity to run my own project. This was not an easy task as I was handed with all the responsibilities of running a project and I had to learn a lot of skills in a short space of time.
That experience exposed me to new systems and software, I now understand the principles of design, specifically with the COMOS platform. This has given me a great deal of knowledge and I now feel that I am on the right career path. This is a male dominated space and being the only woman in my department, I have had to work harder than most. If it wasn’t for the programme, I wouldn’t be where I am right now.”
Scope: 132kV overhead-line, Eskom Substation work, MV and LV reticulation for the Process Plant
Feasibility study that included all required Electrical, Control and Instrumentation Scope
“This programme has exposed my business to a new and dynamic business model. As a business owner I have been exposed to new ways of doing business more efficiently, effectively and in a timely fashion. As a result, my business now has new innovative ways of reaching out to clients and not just doing business in a traditional sense.
The world is moving towards the digital space. I was unaware of the digital space and its untapped capabilities. Being in the programme exposed my business to this knowledge and deepened my understanding of how to operate within the space. I can now apply what I have learned to better align my business with the current world needs and ensure that my business will thrive.
Not having prior knowledge of the digital space, the main challenge which I picked up on is that there is limited knowledge with regards to the technologies used and the businesses which are in that ecosystem. As a new business, breaking into that ecosystem and building a credible reputation has been challenging.”
I have learned new software and how they can be applied in a general business sense. 3EGroup pushes us to be as inventive in solutions as possible while maintaining the required standard for the client and as such, I have learnt how to go from ideas to practical implementations. The programme emphasizes individual responsibility for meeting targets while keeping in line with the clients’ requirements and standards. My communication skills have also improved since joining the programme due to having personal responsibility to continuously communicate with the client so that we stay on track.
“I joined 3E Group as a PLC engineer, being part of the programme then exposed me to a new design software which is COMOS. During my time in the programme, we experimented with a number of different fields using COMOS, this fast track my experience with the platform and allowed me to gain more experience as I would get better at using the platform day by day.
The programme assisted in upgrading my skills when it comes to design specification, I now know how to fully develop the design in a software package, this has given me a deeper understanding of how to use engineering components within design. The understanding of the package was difficult in the initial stage however with time it became easier.
The programme has given me a competitive edge in engineering, understanding the engineering principles which are used in design, this has aided me in my journey to becoming an expert in the field.”
As someone who consistently seeks to be actively involved in the next breakthrough in engineering as a fraternity, I had no knowledge of the innovative COMOS platform until I learnt about 3Egroup and the work the company does in the mining industry utilising COMOS. The COMOS software has given me the opportunity to explore its vast potential, from integrated multi-disciplinary designs to learning about the ability to monitor active equipment on site through IoT concepts.
Scope: MV and LV reticulation, Upgrading of 11kV Substation, Installation of emergency generators, Sizing and Building of Motor Control Centers
Design, Engineering and installation of Plant Low Voltage System including MCCs and Associated Cabling, Small power and Lighting
Control and Instrumentation Basic Engineering Package.
Design, Engineering, Procurement, Installation and Commissioning of Control and Instrumentation scope on an off-shore platform project.
Design, Engineering, Procurement, Installation and Commissioning of Control and Instrumentation scope on an Oxygen Compressor Replacement Project
ICT, Control and Instrumentation Scope for a new mine which included a copper processing plant and other infrastructure
“I started at 3E Group as an intern. I was aware of the mining industry however, I was unaware of the engineering capabilities within the industry as a graduate. I had not been exposed to the design element in engineering. Being in the programme I was given the opportunity to run my own project. This was not an easy task as I was handed with all the responsibilities of running a project and I had to learn a lot of skills in a short space of time.
That experience exposed me to new systems and software, I now understand the principles of design, specifically with the COMOS platform. This has given me a great deal of knowledge and I now feel that I am on the right career path. This is a male dominated space and being the only woman in my department, I have had to work harder than most. If it wasn’t for the programme, I wouldn’t be where I am right now.”
“I joined 3E Group as a PLC engineer, being part of the programme then exposed me to a new design software which is COMOS. During my time in the programme, we experimented with a number of different fields using COMOS, this fast track my experience with the platform and allowed me to gain more experience as I would get better at using the platform day by day.
The programme assisted in upgrading my skills when it comes to design specification, I now know how to fully develop the design in a software package, this has given me a deeper understanding of how to use engineering components within design. The understanding of the package was difficult in the initial stage however with time it became easier.
The programme has given me a competitive edge in engineering, understanding the engineering principles which are used in design, this has aided me in my journey to becoming an expert in the field.”
“This programme has exposed my business to a new and dynamic business model. As a business owner I have been exposed to new ways of doing business more efficiently, effectively and in a timely fashion. As a result, my business now has new innovative ways of reaching out to clients and not just doing business in a traditional sense.
The world is moving towards the digital space. I was unaware of the digital space and its untapped capabilities. Being in the programme exposed my business to this knowledge and deepened my understanding of how to operate within the space. I can now apply what I have learned to better align my business with the current world needs and ensure that my business will thrive.
Not having prior knowledge of the digital space, the main challenge which I picked up on is that there is limited knowledge with regards to the technologies used and the businesses which are in that ecosystem. As a new business, breaking into that ecosystem and building a credible reputation has been challenging.”
As a student the programme enabled me to integrate academic learning with applications in the workplace. The programme helped me to fine tune my technical and communication skills. I have also learned critical and practical work-related skills and I believe it has given me a huge advantage in the workplace. The programme has exposed me to the COMOS platform which is an integrated plant management system. It enables different stakeholders from different fields in the plant design to interact and share data effectively
As someone who consistently seeks to be actively involved in the next breakthrough in engineering as a fraternity, I had no knowledge of the innovative COMOS platform until I learnt about 3Egroup and the work the company does in the mining industry utilising COMOS. The COMOS software has given me the opportunity to explore its vast potential, from integrated multi-disciplinary designs to learning about the ability to monitor active equipment on site through IoT concepts.
I have learned new software and how they can be applied in a general business sense. 3EGroup pushes us to be as inventive in solutions as possible while maintaining the required standard for the client and as such, I have learnt how to go from ideas to practical implementations. The programme emphasizes individual responsibility for meeting targets while keeping in line with the clients’ requirements and standards. My communication skills have also improved since joining the programme due to having personal responsibility to continuously communicate with the client so that we stay on track.
Scope: Medium Voltage reticulation for the coal washing plant
Scope:22kV Overhead line, installing 22kV auto-reclosure, LV installations including transformers and MCCs
Scope: MV and LV reticulation, Upgrading of 11kV Substation, Installation of emergency generators, Sizing and Building of Motor Control Centers
Scope: 132kV overhead-line, Eskom Substation work, MV and LV reticulation for the Process Plant
Design, Engineering, Procurement, Installation and Commissioning of Control and Instrumentation scope on an off-shore platform project.
Control and Instrumentation Basic Engineering Package.
Design, Engineering, Procurement and Commissioning of Control and Instrumentation scope for an upgrade project on carbon dioxide plant.
Control and Instrumentation Feasibility Study
Coal Washing Plant Commissioning
Control and Instrumentation Feasibility Study.
Design, Engineering and installation of Plant Low Voltage System including MCCs and Associated Cabling, Small power and Lighting
Feasibility study that included all required Electrical, Control and Instrumentation Scope
ICT, Control and Instrumentation Scope for a new mine which included a copper processing plant and other infrastructure
Design, Engineering, Procurement, Installation and Commissioning of Control and Instrumentation scope on an Oxygen Compressor Replacement Project
Scope:22kV Overhead line, installing 22kV auto-reclosure, LV installations including transformers and MCCs
Design, Engineering and installation of Plant Low Voltage System including MCCs and Associated Cabling, Small power and Lighting
Control and Instrumentation Feasibility Study.
Control and Instrumentation Basic Engineering Package.
Scope: Medium Voltage reticulation for the coal washing plant
Coal Washing Plant Commissioning
“I started at 3E Group as an intern. I was aware of the mining industry however, I was unaware of the engineering capabilities within the industry as a graduate. I had not been exposed to the design element in engineering. Being in the programme I was given the opportunity to run my own project. This was not an easy task as I was handed with all the responsibilities of running a project and I had to learn a lot of skills in a short space of time.
That experience exposed me to new systems and software, I now understand the principles of design, specifically with the COMOS platform. This has given me a great deal of knowledge and I now feel that I am on the right career path. This is a male dominated space and being the only woman in my department, I have had to work harder than most. If it wasn’t for the programme, I wouldn’t be where I am right now.”
Design, Engineering, Procurement and Commissioning of Control and Instrumentation scope for an upgrade project on carbon dioxide plant.
Design, Engineering, Procurement, Installation and Commissioning of Control and Instrumentation scope on an off-shore platform project.
Feasibility study that included all required Electrical, Control and Instrumentation Scope
I have learned new software and how they can be applied in a general business sense. 3EGroup pushes us to be as inventive in solutions as possible while maintaining the required standard for the client and as such, I have learnt how to go from ideas to practical implementations. The programme emphasizes individual responsibility for meeting targets while keeping in line with the clients’ requirements and standards. My communication skills have also improved since joining the programme due to having personal responsibility to continuously communicate with the client so that we stay on track.
Control and Instrumentation Feasibility Study
As a student the programme enabled me to integrate academic learning with applications in the workplace. The programme helped me to fine tune my technical and communication skills. I have also learned critical and practical work-related skills and I believe it has given me a huge advantage in the workplace. The programme has exposed me to the COMOS platform which is an integrated plant management system. It enables different stakeholders from different fields in the plant design to interact and share data effectively
ICT, Control and Instrumentation Scope for a new mine which included a copper processing plant and other infrastructure
Scope: 132kV overhead-line, Eskom Substation work, MV and LV reticulation for the Process Plant
“I joined 3E Group as a PLC engineer, being part of the programme then exposed me to a new design software which is COMOS. During my time in the programme, we experimented with a number of different fields using COMOS, this fast track my experience with the platform and allowed me to gain more experience as I would get better at using the platform day by day.
The programme assisted in upgrading my skills when it comes to design specification, I now know how to fully develop the design in a software package, this has given me a deeper understanding of how to use engineering components within design. The understanding of the package was difficult in the initial stage however with time it became easier.
The programme has given me a competitive edge in engineering, understanding the engineering principles which are used in design, this has aided me in my journey to becoming an expert in the field.”
Design, Engineering, Procurement, Installation and Commissioning of Control and Instrumentation scope on an Oxygen Compressor Replacement Project
“This programme has exposed my business to a new and dynamic business model. As a business owner I have been exposed to new ways of doing business more efficiently, effectively and in a timely fashion. As a result, my business now has new innovative ways of reaching out to clients and not just doing business in a traditional sense.
The world is moving towards the digital space. I was unaware of the digital space and its untapped capabilities. Being in the programme exposed my business to this knowledge and deepened my understanding of how to operate within the space. I can now apply what I have learned to better align my business with the current world needs and ensure that my business will thrive.
Not having prior knowledge of the digital space, the main challenge which I picked up on is that there is limited knowledge with regards to the technologies used and the businesses which are in that ecosystem. As a new business, breaking into that ecosystem and building a credible reputation has been challenging.”
Scope: MV and LV reticulation, Upgrading of 11kV Substation, Installation of emergency generators, Sizing and Building of Motor Control Centers
As someone who consistently seeks to be actively involved in the next breakthrough in engineering as a fraternity, I had no knowledge of the innovative COMOS platform until I learnt about 3Egroup and the work the company does in the mining industry utilising COMOS. The COMOS software has given me the opportunity to explore its vast potential, from integrated multi-disciplinary designs to learning about the ability to monitor active equipment on site through IoT concepts.